UNDERSTANDING THE CURING PROCESS

Your Ceramic Pro KAVACA Window Film was installed by certified tinters. While the tint has initially bonded to the inside of your windows prior to it being released to you, the adhesive needs some time to cure.

Please follow these directions to ensure your window film cures correctly.

Step 1: Do Not Roll Down Windows For 3-5 Days

The film may take 1-4 weeks to completely cure depending on environmental conditions such as temperature and how much sun the vehicle sees.

The more sun and heat the vehicle sees, the faster the drying process.

Step 2: Be Aware of Some Common Side Effects

Window film is applied with soapy water and as the water evaporates, the film bonds to the glass.

During this time the film may look:

• Hazy
• Foggy
• Streaked
• Orange peel texture
• Water blisters

This is a natural side-effect of the installation process. All of these will go away as the film cures. Do not push or move any water that is trapped in between the glass and the film

CLEANING & DETAILING KAVACA WINDOW TINT

KAVACA Window Films utilize nanotechnology within the multiple layers of film and the adhesive to provide superior protection against UV and IR emissions from the sun. It due to this technology that using the recommended aftercare cleaners is required, to maintain it’s integrity and reduce damage to the film.

It is CRITICAL to not use ANY cleaning solutions with ammonia or alcohols in the chemical. Most glass cleaners (such as Windex) utilize these two ingredients in their cleaning products.

*NOTE: Ammonia and Alcohols WILL eventually break down the integrity of the film, leading to fading, cracking, and discoloration. Using ammonia or alcohol-based cleaners will void any manufacturers warranty.

Cleaning Instructions

Step 1: Do NOT clean your windows for at least seven days after your tint was installed and the vehicle released back to you.

Step 2: For the remainder of the curing process (first full month), you can clean your windows but be sure to use light pressure especially on all edges of the film.

Step 3: Secure the recommended cleaning supplies. For proper cleaning of KAVACA Window Film, you will use:

• Americana Global Ceramic Glass Cleaner
• Ceramic Pro Grey Waffle Weave Microfiber Towel
• Ceramic Pro Blue Flat Microfiber Towel

*You can purchase these products directly at https://www.CeramicPro.com/Shop

Step 4: Prior to starting the window cleaning process, verify that the windows are cool to the touch. For best results the windows should be cool and out of direct sunlight.

Step 5: Shake up the bottle of Americana Global Ceramic Cleaner prior to use.

Step 6: Spray a fine mist of Americana Global Ceramic Glass Cleaner onto the glass surface. A little goes a long way, so there is no need to saturate the glass surface.

Step 7: Fold a Ceramic Pro Microfiber Waffle Weave towel into four parts. Use one side of a clean and dry Ceramic Pro Microfiber Waffle Weave towel to wipe the window.

Step 8: Flip to dry side of towel and buff off the entire window for a streak free finish.

Step 9: If streaks are still visible, use a dry Ceramic Pro Flat Microfiber Glass Towel to polish the glass.

Step 10: Repeat the process on both sides of the window.

Key Tips On What To Avoid

• Never use cleaning solutions with ammonia in them.
• Avoid buildup of sand and dirt in the bottom gasket of a moving window. Use compressed air to blow out the bottom gasket of window seals occasionally.
• Prevent dog claws or anything sharp rubbing on the inside of the window.
• Avoid swinging seatbelt buckle into side window when unbuckling.

At Tempe Auto Spa, we understand the importance of proper window tint aftercare, especially in the intense climate of Phoenix, Arizona.

By following these expert tips and investing in KAVACA Ceramic window tint, you can enjoy enhanced comfort, privacy, and style for years to come. Contact us today to learn more about our window tinting services and schedule your appointment. Your satisfaction is our priority, and we’re here to exceed your expectations every step of the way.

Window Tint Aftercare Tips:

1. Allow Proper Drying Time: After installing KAVACA Ceramic window tint, it’s essential to allow sufficient time for the film to dry completely. Avoid rolling down the windows or cleaning the interior for at least three to five days to ensure that the tint adheres properly to the glass.
2. Gentle Cleaning: When cleaning your tinted windows, opt for mild, ammonia-free cleaners and soft microfiber cloths to prevent scratching or damaging the film. Avoid using abrasive cleaners or rough materials that could compromise the integrity of the tint.
3. Avoid Harsh Chemicals: Refrain from using harsh chemicals or abrasive substances on your tinted windows, as these can degrade the film and diminish its effectiveness over time. Stick to gentle cleaning solutions and avoid products containing ammonia, which can cause the tint to bubble or discolor.
4. Protect from Sun Exposure: While KAVACA Ceramic window tint provides excellent UV protection, prolonged exposure to the sun can still affect its longevity. Whenever possible, park your vehicle in shaded areas or use a car cover to shield your tinted windows from direct sunlight.
5. Professional Maintenance: Trust the experts at Tempe Auto Spa for professional window tint maintenance and care. Our team can inspect your tinted windows for any signs of damage or wear and provide the necessary maintenance to ensure optimal performance and longevity.

If you’d like to review the official Ceramic Pro Window Tint Aftercare Warranty Information – we’ve got that easily accessible for you.

Click this link to download the Aftercare Warranty Documents.