Professional Window Tinting in Phoenix

Window Tint Installation

At Tempe Auto Spa, we specialize in installing high-quality window film on automotive glass. Our installation process involves precision tools and techniques. Some of the materials used to install tint include water, cutting devices, squeegees, and heat.

While we conduct all tint installations in a controlled, clean-room environment to minimize contamination, microscopic particles or natural elements may affect the result. Rest assured, we strive to deliver the highest quality and attention to detail in every installation.

Airborne Contaminants – Dust / Pet Dander

Dust is an inevitable part of our environment and nearly impossible to eliminate from the air entirely. As a result, keeping it completely off the film is equally challenging. However, we take every possible precaution to minimize its presence. Please note that we cannot guarantee the absence of dust, and minor dust particles.

If the car’s interior is excessively dirty, additional cleaning may be required to maintain a clean environment. Any extra fees will be communicated to the client and agreed upon before the service is performed.

However, this does not eliminate the potential of small airborne contaminants sticking between the film and the automotive glass.

Dot Matrix

Dot Matrix refers to a pattern of small dots applied by the factory along the edges of some windows and the back glass, serving as a decorative border. These dots create slight bumps on the glass, which can cause window film to adhere to the raised areas rather than the smooth surface.

While this doesn’t lead to peeling, it may result in a silvered appearance around the dots. This effect is normal and permanent. As the film dries, it typically settles into a more uniform look, and in some cases, the dots can be gently pressed down to minimize the effect.

Harmonic Distortion

If you’re wearing polarized sunglasses or glasses, you may notice visual anomalies on the glass, such as rainbows, lines, or marks. These are a natural result of the glass tempering process. Please note that Tempe Auto Spa is not responsible for these imperfections. If you would like to have the tint removed, an additional fee will apply.

Electrical Issues After Install

Modern cars are equipped with more electrical components than ever before. While every effort is made to prevent damage during tinting, the process does involve spraying water onto the windows, which can expose these systems to moisture and water runoff, posing inherent risks.

This is particularly important for windshield installations, as water runoff behind the dashboard can potentially damage the vehicle’s ECU. Please note that we cannot be held responsible for any damage that may occur to these electrical systems.

*Please ask our Tempe Auto Spa staff before having the installation to understand your risk before work begins.

Legality

In Arizona, vehicles intended for use on public roads are prohibited from having tinted front windows (driver and passenger doors, forward of the B-pillar) or windshields. The only exception is a non-reflective tint with up to 35% VLT allowed on the top 6 inches of windshields in passenger vehicles. Additional tinting is permitted only with a medical exemption, which requires a doctor’s certification and approval from the Arizona Motor Vehicle Department.

The rear windows, including the rear windshield, can legally be tinted to any level of darkness (VLT). However, no window tint may have a mirrored or metallic finish. Additionally, if the rear windshield is tinted, the vehicle must be equipped with dual side mirrors.

Tints that do not comply with Arizona state laws are intended solely for show cars or off-road vehicles that will not be driven on public roads.

101 Motors / Tempe Auto Spa is not liable for any tickets or incidents resulting from non-compliant tinting or the illegal use of a tinted vehicle. Please note, if tint removal is required, an additional fee will apply.

Window Tint Removal

At Tempe Auto Spa, proper installation of new window film requires the removal of any existing film on the glass. This step ensures the new film bonds correctly to the surface, providing optimal performance and durability. Additionally, removing the old tint is essential to validate any manufacturer warranty associated with the new film.

We ONLY use steam to remove old window film from automotive glass. This process will break down adhesives, which makes it easier to remove film. While this technique helps to reduce potential problems, removing window tint, regardless of its type, age, or condition, comes with a few risks. Some of these include the following.

• Scratching of automotive glass
• Inability to remove all adhesive residue from existing tint
• Inability to remove dye transfer embedded in the automotive glass from older window films
• Potential damage to electrical components within automotive glass (including but not limited to, rear defroster, safety systems, temperature control systems).

101 Motors / Tempe Auto Spa can not be held liable for any damage to automotive glass where existing tint needs to be removed. 

Aftercare Instructions

UNDERSTANDING THE CURING PROCESS

Your Ceramic Window Film was installed by certified tinters. While the tint has initially bonded to the inside of your windows prior to it being released to you, the adhesive needs some time to cure.

Please follow these directions to ensure your window film cures correctly.

Step 1: Do Not Roll Down Windows For 3-5 Days

The film may take 1-4 weeks to completely cure depending on environmental conditions such as temperature and how much sun the vehicle sees.

The more sun and heat the vehicle sees, the faster the drying process.

Step 2: Be Aware of Some Common Side Effects

Window film is applied with soapy water and as the water evaporates, the film bonds to the glass.

During this time the film may look:

• Hazy
• Foggy
• Streaked
• Orange peel texture
• Water blisters

This is a natural side-effect of the installation process. All of these will go away as the film cures. Do not push or move any water that is trapped in between the glass and the film

CLEANING & DETAILING CERAMIC WINDOW TINT

Ceramic Window Films utilize nanotechnology within the multiple layers of film and the adhesive to provide superior protection against UV and IR emissions from the sun. It due to this technology that using the recommended aftercare cleaners is required, to maintain it’s integrity and reduce damage to the film.

It is CRITICAL to not use ANY cleaning solutions with ammonia or alcohols in the chemical. Most glass cleaners (such as Windex) utilize these two ingredients in their cleaning products.

*NOTE: Ammonia and Alcohols WILL eventually break down the integrity of the film, leading to fading, cracking, and discoloration. Using ammonia or alcohol-based cleaners will void any manufacturers warranty.

Cleaning Instructions

Step 1: Do NOT clean your windows for at least seven days after your tint was installed and the vehicle released back to you.

Step 2: For the remainder of the curing process (first full month), you can clean your windows but be sure to use light pressure especially on all edges of the film.

Step 3: Secure the recommended cleaning supplies. For proper cleaning of Ceramic Window Film, we recommend using:

• Americana Global Ceramic Glass Cleaner
• Ceramic Pro Grey Waffle Weave Microfiber Towel
• Ceramic Pro Blue Flat Microfiber Towel

Step 4: Prior to starting the window cleaning process, verify that the windows are cool to the touch. For best results the windows should be cool and out of direct sunlight.

Step 5: Shake up the bottle of Window Film Safe Cleaner prior to use.

Step 6: Spray a fine mist of Window Film Safe Glass Cleaner onto the glass surface. A little goes a long way, so there is no need to saturate the glass surface.

Step 7: Fold a Microfiber Waffle Weave towel into four parts. Use one side of a clean and dry Microfiber Waffle Weave towel to wipe the window.

Step 8: Flip to dry side of towel and buff off the entire window for a streak free finish.

Step 9: If streaks are still visible, use a dry Flat Microfiber Glass Towel to polish the glass.

Step 10: Repeat the process on both sides of the window.

Key Tips On What To Avoid

• Never use cleaning solutions with ammonia in them.
• Avoid buildup of sand and dirt in the bottom gasket of a moving window. Use compressed air to blow out the bottom gasket of window seals occasionally.
• Prevent dog claws or anything sharp rubbing on the inside of the window.
• Avoid swinging seatbelt buckle into side window when unbuckling.

Warranty

Our window films come with a manufacturer-backed Lifetime Warranty, covering material defects, fading, discoloration, cracking, and premature adhesive failure. Items that are not covered by the manufacturer warranty include – but are not limited to:

• Damage to film caused by failure to use proper aftercare maintenance as described above.
• Use of any chemical agent or cleaning media that leaves residue or damages the integrity of the film.
• Any surface damage to the window film, such as scratches or tears in the film caused by seat belts, touching, finger nails, pets, or other sources.
• Dust or debris outside of the line of vision.

Additionally, we guarantee the quality of the installation following the completion of the service, ensuring your satisfaction and peace of mind.

If you notice any defects, please report them to 101 Motors / Tempe Auto Spa immediately. We will inspect the issue and, if confirmed, address and repair any flaws in our workmanship.